INDUSTRIJSKA PNEUMATIKA

Compressed air dryers

Refrigerated and adsorption dryers for removing moisture from compressed air.

Compressed air dryers are a key component of every high-quality compressed air preparation system. Their basic function is to remove moisture from compressed air, which prevents condensate, corrosion and damage to pneumatic components and industrial equipment.

When selecting a compressed air dryer, several important parameters must be taken into account:

Selection parameters

Air flow
m³/min or l/min – the quantity of compressed air the dryer must process
Working pressure
bar – the system pressure at which the dryer will operate
Inlet air temperature
the temperature of the compressed air at the dryer inlet
Pressure dew point
°C – the required dryness level of the compressed air at a given pressure
Operating conditions
ambient temperature and specific requirements of the industrial application

Refrigerated air dryers

Refrigerated compressed air dryers are one of the most commonly used solutions for removing moisture in industrial pneumatic systems. Their operating principle is based on cooling the compressed air, which causes water vapour to condense. The resulting condensate is separated and removed from the system, while the dried air continues to the pneumatic consumers. Most refrigerated dryers achieve a pressure dew point of 3 °C to 7 °C, although there are versions of this dryer type that lower the air pressure dew point below 0 °C.

Adsorption air dryers

Adsorption compressed air dryers are intended for applications requiring an extremely low moisture level. Drying takes place as the compressed air passes through an adsorbent material that retains water vapour. Depending on the design and system requirements, they are most often used when a pressure dew point of −40 °C or −70 °C is needed.

AVS RÖMERFESTOAIRTACAIRFITOMIUNIVERCOMEXFNA COMPRESSORSKNOCKS