INDUSTRIJSKA PNEUMATIKA

Tubing and clamps

Polyamide, polyurethane, PTFE, silicone and PVC for every application.

Choosing the right tubing is important for the reliable, long-lasting operation of any system. Depending on the application, working pressure, temperature, flexibility and chemical resistance, different materials are used.

Polyamide tubing

-60 do +100 °C

Good mechanical strength, pressure and wear resistance, with solid temperature and chemical resistance. Used primarily to transport compressed air, but also found in other industries. A wide range of metric and inch sizes is available, including spiral versions with and without fittings.

Polyurethane tubing

-35 do +60 °C

Flexible tubes with small bending radii allow easy installation and are especially suited to moving machine parts and equipment where the tube is bent often. Available non-reinforced, reinforced and spiral, with and without fittings, in metric and inch sizes.

Polyethylene tubing

-10 do +40 °C

A light and economical solution for many pneumatic and industrial applications, with good chemical resistance, low weight and simple installation. Especially practical for installations that do not need heavy mechanical loads, small bending radii or high pressures and temperatures.

PTFE tubing (Teflon)

-196 do +260 °C

Used in more demanding applications that require high temperature and excellent chemical resistance. PTFE has very low friction and resists a wide range of chemicals, which is why it is used where standard PA, PU and PE tubing is not suitable.

Silicone tubing

-60 do +200 °C

Characterised by high flexibility and good resistance to temperature changes. Silicone stays flexible even at low temperatures and can be used in a variety of industrial and technical applications.

Clear PVC tubing

-20 do +60 °C

Flexible, transparent tubes for low-pressure systems. Their high clarity allows simple visual control of fluid flow. Suitable for the food industry and for transporting fluids such as water, air, argon, wine, fruit juices, lemonade and mineral water, as well as alcoholic drinks up to 20 vol. % (not beer in dispensing systems, nor products containing fats).

Reinforced PVC tubing

-20 do +60 °C

With internal reinforcement, used when greater resistance to pressure and mechanical loads is required. The reinforcement increases tube stability and reduces the risk of deformation during operation.

Flexible coolant tubing

-20 do +60 °C

A flexible tubing system made of high-strength POM (polyacetal) with good chemical resistance to various media. Its primary purpose is transporting and directing coolant. It consists of several sections that can be combined with threaded fittings of different sizes and nozzles.

Worm-drive tube clamp

Used to fasten and tighten flexible tubes onto fittings, tube spigots or couplings. It is tightened with a screw that moves a metal band, adjusting the clamp to the tube diameter.

Double-eared tube clamp

A clamp with two ears, used for firm and permanent tightening of flexible tubes onto fittings, tube spigots and couplings. The two ears are squeezed together with pliers, giving a tight joint without any screw mechanism.

AVS RÖMERFESTOAIRTACAIRFITOMIUNIVERCOMEXFNA COMPRESSORSKNOCKS