Fittings and couplings
Push-in, push-on, compression and threaded fittings and quick couplings.
Fittings and couplings are key elements of every pressurised system, pneumatic or otherwise. They connect tubing to cylinders, valves, regulators, filters and other components, and safely join, separate and route lines for various media. They are selected by tube type and size, thread type, working pressure, temperature, material and system medium.
Push-in fittings
Ø 3–16 mmQuick, tool-free tube connection — the tube is pushed in, where an internal mechanism grips, seals and secures it; press the release ring to disconnect. Used with PU, PA, PE and PTFE tubing. Versions: straight (male and female thread), union, elbow (swivel and fixed), T, Y, X, bulkhead and reducing. Available for Ø 3, 4, 6, 8, 10, 12, 14 and 16 mm and inch tubing.

Push-on fittings with nut
4/2 – 15/12,5 mmFor a firm, leak-tight joint, especially with soft tubing, vibration or movement. The tube is pushed over a tapered spigot and secured with a nut. Made entirely of nickel-plated brass, suitable for higher pressures and temperatures. Versions: straight (male and female), union, elbow (swivel and fixed), T and reducing.

Quick couplings and plugs
NW 2.7 · 5.0 · 7.2Fast connection and disconnection of lines and equipment without dismantling the installation — ideal for pneumatic tools and frequent reconnection. Types: Type 26 (NW 7.2) Euro couplings, Type 21 (NW 5.0) Mini and Type 20 (NW 2.7) Micro. Available with male and female threads or as tube-barb versions with a clamp.

Compression fittings for low-pressure systems
Ø 4–15 mmFittings with a brass compression ring (olive) and nut for copper or plastic tubing. Tightening the nut bites the ring into the tube for a firm, leak-tight joint; plastic tubing requires a suitable insert. Versions: straight (male and female), union, elbow (swivel and fixed), T and reducing.

Tube tail fittings
Ø 2–38 mmFor connecting flexible tubes (PVC, rubber etc.) to a device or another fitting. The tube is pushed over the barbed tail and secured with a clamp. Available for tube inner diameters from 2 to 38 mm and various thread sizes.

Threaded fittings
For connecting components with threaded ports and adapting between thread types and sizes. G (ISO 228, BSPP) – parallel, 55°, sealed with a washer or O-ring. R/Rp/Rc (ISO 7, BSPT) – tapered male, 55°, sealed on the thread with PTFE tape, thread or paste. NPT (ANSI/ASME B1.20.1) – tapered, 60°, sealed on the thread. Versions: male nipple and female socket, elbows, T, Y, bulkhead, reducers, extensions and plugs.










